HS30

HS30 is a one part, neutral cure adhesive sealant based on Hodgson Hybrid Polymer Technology.

Suitable for the sealing and bonding of internal and external joints in a wide range of construction and industrial assembly applications where permanent flexibility is essential. These include the manufacture of commercial and specialist vehicles, leisure vehicles, caravans, residential park homes, modular buildings and façade applications. It has an extended open time for tooling, can be painted* and has high UV resistance.

APPLICATIONS

An all-purpose sealant suitable for sealing expansion joints and gap filling to form a weatherproof and watertight seal.

• High movement accommodation
• Permanently flexible
• Paintable
• Solvent & Isocyanate free
• Low odour
• High movement capacity
• Extended open time, for tooling
• Cures tack free and highly elastic
• Fast curing
• Excellent storage stability
• Built in Anti-Microbial technology

PROPERTIES

Application temperature range: + 5oC to + 40oC

Shelf life: 18 months

Skinning time: 20-40 minutes

Working time: 20-40 minutes

INSTRUCTIONS

Joint design: Please consult the Technical Information Sheet entitled ‘Joint design for cartridge based products’ prior to application.

Surface preparation: All surfaces must be clean, dry and free from frost, grease and loose materials. Apply primer if required. Most substrates only require priming if testing indicates it is needed. Apply using a skeleton gun into the joint ensuring good contact with surfaces. In situations where an especially neat finish is required, use masking tape to cover the face edges of the joint and remove immediately once tooling has been completed.

Tooling: Tool immediately after application, within the working time for the product.