HS45

HS45 is a neutral cure, high modulus, solvent free, one part, moisture cure, adhesive based on Hodgson Hybrid Polymer Technology. Very high strength, initial green strength, tack/grab and adhesion. A very high strength adhesive with excellent initial tack and green strength.

APPLICATIONS

Suitable for bonding a wide range of materials including aluminium, steel, wood, glass, concrete, polycarbonate, plaster, PU and composite panels. For internal and external use.

• Weather resistant
• High initial grab and green strength
• Paintable
• High strength / fast cure
• Low odour
• Cures tack free
• Permanantly flexible
• Can be sanded
• Non corrosive
• Excellent storage stability

PROPERTIES

Application temperature range: + 5 Deg C to + 40 Deg C

Shelf life: 18 months

Skinning time: 10-30 minutes

Working time: 10-30 minutes

INSTRUCTIONS

Joint design: Please consult the Technical Information Sheet entitled ‘Joint design for cartridge based products’ prior to application.

Surface preparation: All surfaces must be clean, dry and free from frost, grease and loose materials. Apply primer if required. Most substrates only require priming if testing indicates it is needed. Apply using a skeleton gun into the joint ensuring good contact with surfaces. In situations where an especially neat finish is required, use masking tape to cover the face edges of the joint and remove immediately once tooling has been completed.

Tooling: Tool immediately after application, within the working time for the product.